1.甲方与乙方同时检测设备，检测完后双方在验机单上签字（《搬迁验机表》见附件 a）；
2.由甲方关闭搬迁设备软件程序；
3.拆卸前每位乙方工作人员佩戴防静电手环；
4.以甲方现在每个机柜为一套设备单元进行统一标识；
5.每台小型机，磁盘阵列柜对应的联线贴上对应标签；
7.对设备进行减震包装；
(b). disassembly
1. both the shipper and the carrier shall inspect and test the device simultaneously and both parties shall sign on the inventory list (see attachment a) after the satisfactory inspection.
2. the shipper is to terminate all the software employed on the device.
3. each employee of the carrier has to put on an antistatic bracelet before work.
4. the carrier shall now start to attach a color-coded label to the cabinet and its corresponding device in an organized way.
5. the cables of each small machine and disk array cabinet are marked with identical color-coded labels respectively.
6. the cables of the device are taken away.
7. the device is securely packed in shock-absorbing materials.
8. the device together with its accessories is loaded in the vehicle.
[台式机，监控器，交换机搬迁细则]
一 乙方搬迁前准备
1.熟知甲方提供的运输线路；
2.安排好搬迁人员分工；
3.准备所有搬迁所需工具，车辆及相关资料；
4.经甲方同意提前三天到新机房熟悉甲方提供的设备摆放图。
moving instructions on platform machine, monitor, and swithboard
(a). the carrier shall make the following preparations beforehand:
1. be fully familiar with the transportation route or routes chosen by the shipper.
2. divide the workload among its employees.
3. get ready the vehicles, relevant documents and all the tools needed.
4. with the shipper＇s approval, inspect the new terminal and get familiar with its layout three days prior to the move.
1.甲方与乙方同时检测设备，检测完后双方在验机单上签字（《搬迁验机表》见附件 a）；
2.由甲方关闭搬迁设备软件程序；
3.拆卸前每位乙方工作人员佩戴防静电手环；
4.每套 台式机进行统一标识；
5.每台监控器，交换机对应的联线贴上对应标签；
7.对设备进行减震包装；
(b). disassembly
1. both the shipper and the carrier shall inspect and test the device simultaneously and both parties shall sign on the inventory list (see attachment a) after the satisfactory inspection.
2. the shipper is to terminate all the software employed on the device.
3. each employee of the carrier has to put on an antistatic bracelet before work.
4. a color-coded label is attached to the platform machine in an organized way.
5. the cables of each monitor and switchboard are marked with identical color-coded labels respectively.
6. the cables of the device are taken away.
7. the device is securely packed in shock-absorbing materials.
8. the device together with its accessories is loaded in the vehicle.
[ups搬迁细则 ]
一 乙方搬迁前准备
1.熟知甲方提供的运输线路；
2.安排好搬迁人员分工；
3.准备所有搬迁所需工具，车辆及相关资料；
4.经甲方同意提前三天到新机房熟悉甲方提供的设备摆放图；
5.与ups厂商相关工作人员配合完成拆装前准备。
moving instructions on ups main frame
(a). the carrier shall make the following preparations beforehand:
1. be fully familiar with the transportation route or routes chosen by the shipper.
上一页 [1] [2] [3] [4] [5] [6] [7] [8] 下一页
Tag:运输合同，公路运输合同,运输合同样本，合同范本 - 运输合同